Use Of The Buttons On The Md60Log; Use Of The Md60Log; First Turn-On Of The Unit - Athena Evolution GET MD60LOG User Manual

8 USE OF THE BUTTONS ON THE MD60LOG

Each button is set up for two kinds of use: brief pressure and prolonged pressure. According to the length of
time of the pressure on the buttons, different commands may be issued.
•
To turn on the unit, push for over two seconds the S (SET) button.
•
To turn off the device, or quickly scroll the menus push and hold down the ARROW button.
•
To enter in the MAIN MENU or in the SUBMENUS briefly press the S (SET) button.
•
To scroll through the MENU items, press briefly the ARROW button.
•
To confirm a setting briefly press the S (SET) button.

9 USE OF THE MD60LOG

Before using the device it is strongly recommended that this manual be read carefully.
Trying out each of the functions described below, you will quickly gain confidence with the use of the unit.
NOTE: for ease of use the following manual describes the menus and the relative items in English.
9.1

FIRST TURN-ON OF THE UNIT

When turning on the unit for the first time it will ask that the system language be set: select with the ARROW
button the language desired and then confirm by pressing the S button.
LANGUAGE ENGLISH
<< EXIT
LANGUE FRANCAIS
<< EXIT
NOTE: The language is requested even in the case of a RESET of the instrument (see chapter 10.4 of this
manual).
After setting the language it will be necessary to follow what is found in the following chapters.
8
LANGUAGE ENGLISH
<< EXIT
LANGUE FRANCAIS
<< EXIT
MD60LOG User Manual rev. 05
Copyright ©2010 GET by Athena Evolution srl. All rights reserved
LANGUE FRANCAIS
<< EXIT