Table of Contents
Advertisement
12 FIRMWARE UPDATING
The firmware of the MD60LOG is updated by way of a connection to a personal computer by way of a USB.
To carry out the updating, proceed as follows:
•
Turn on the instrument and connect to a PC by way of the USB cable.
•
Start up the firmware updating clicking the left mouse button on the self-starting file contained in the fw.
•
Press the UPDATE button and stand by until the end of the updating procedure (please attempt that the
MD60LOG restart and show SYNC on the display).
WARNING: DON'T DISCONNECT USB CABLE UNTIL DEVICE IS RESETTED
•
Disconnect the USB cable.
ATTENTION: USE CHARGED BATTERIES DURING THE FIRMWARE UPDATING. NON
COMPLIANCE WITH FIRMWARE UPDATE MAY LOCK THE DEVICE
MD60LOG User Manual rev. 05
Copyright ©2010 GET by Athena Evolution srl. All rights reserved
23
Advertisement
Table of Contents
Need help?
Do you have a question about the GET MD60LOG and is the answer not in the manual?