Table of Contents
Advertisement
Quick Links
Greenhouse
Assembly Instruction
Overall Size/CM: L250 x W190 x H220
Overall Size/inch: L98"x W75"x H86"
IMPORTANT
You must read these instructions carefully before you start to assemble it.
Please ensure that you find all parts in the correct type and
Please carry out the steps according to the instructions.
Do not tighten the steps until completing on
Keep the instruction manuals in a safe place for future reference.
quantity as mentioned in the list.
the assembly of the whole product.
9820103-1
9820103-2
9820103-3
Advertisement
Table of Contents
Related Manuals for Hanover HANGRNHSP8X6-GRN
Summary of Contents for Hanover HANGRNHSP8X6-GRN
- Page 1 Greenhouse Assembly Instruction Overall Size/CM: L250 x W190 x H220 Overall Size/inch: L98"x W75"x H86" 9820103-1 9820103-2 9820103-3 IMPORTANT You must read these instructions carefully before you start to assemble it. Please ensure that you find all parts in the correct type and quantity as mentioned in the list.
-
Page 3: Safety Advice
TOOLS & EQUIPMENT REQUIRED SAFETY ADVICE We strongly recommend the use of work gloves during assembly. Protective Equipment: Do not attempt to assemble the greenhouse in windy or wet conditions, 1.Helmet Do not touch overhead power cables with the aluminum profiles. 2.Glove Always wear shoes and safety goggles when working with extruded aluminum. -
Page 4: Product Size
PRODUCT SIZE Find a flat ground which is nearly 2 times bigger than the Green house before installation. OTHER CAUTIONS 1. 3 people required. One is for measuring & taking marks to ensure the installation dimension. The second person is responsible for the installation The last one do as assistant and assure the safety. - Page 5 Part list for 9820103 Greenhouse (3-1) Front wall and back wall Qty. Qty. 550mm 21.6" 1852mm 72.9" 1328mm 493mm / 19.4" NBP1 52.2" 60mm / 2.36" 1897mm / 1.57" 40mm NBP2 74.7" 735mm / 29" Qty. NO. Qty. / 24.9" 632mm Upward 1899mm...
- Page 6 Part list for 9820103 Greenhouse (3-2) Left and right walls and top Qty. Qty. / 22.75" 578mm 2501mm 1197mm NBP5 47" 98.5" / 45" 1142mm / 22.8" 580mm 2442mm 96" 2440mm 96" 588mm / 23" Qty. Qty. / 19.7" 500mm 588mm / 23"...
- Page 7 Part list for 9820103 Greenhouse (3-3) Summary of polycarbonate panel...
- Page 8 The white film side should be toward to the sun as it is UV-protected. "hexagonal screw" Pre-placed Place the "hexagonal screw"into the groove,turn clockwise until it stops turning. Adjust the "hexagonal screw"by hand and twist so threads fix it in place. Place other parts on "hexagonal screw"and assemble nut .
-
Page 9: Door Assembly
Door Assembly PD1 x3 D1 x2 D3 x2 F3 x16 5 x3 D2 x4 Ⅳ Ⅱ Ⅰ Ⅲ 180mm 7" 180mm Door Frame Assembly - Step 1 Door Frame Assembly - Step 2 PC Panel Installation Hinge Installation 7"... -
Page 10: Window Installation
Window Installation S8 x2 F8 x2 W1 x2 W3 x2 S9 x2 F2 x8 F9 x2 W4 x2 W2 x4 WINDOWS x2 Ⅱ Ⅰ Ⅲ back Note the UV surface should be toward the Sun. Note the direction of part No.3 Note the direction of parts F8 and F2 screws can be screwed easier if using lubricants. -
Page 11: Base Assembly
NBP1 NBP1 NBP2 NBP5 3A x4 F3 x16 Ⅰ Ⅱ Ⅴ NBP1 NBP5L NBP1 Base Assembly F3x4 pcs NBP1 NBP5R NBP2 NBP2 Silicon NBP5 F3x4pcs F3x4 pcs Install each 3A to each corner with 4 pieces F3 screw. Ⅲ NBP1 NBP5 Ⅳ... - Page 12 F4 x26 C2 x8 15 x7 B7 x2 Pre-place 2 pieces F4 screws in the groove of 5 pieces part 15#. Ⅰ but not fully-tightened. Lock the screws F4 by hand, Ⅱ Preplace 4 pieces F4 screws for Ⅲ 2 pieces part 5, then install 1 piece part B7 on each part 5# with the middle 2 pieces F4 screws preplaced previously.
-
Page 13: Back Wall Installation
Back Wall Installation 7 x2 F4 x8 Ⅰ Ⅱ Frame of backwall Installation NBP5R NBP2 Ⅱ Ⅱ Ⅰ Pre-place 2 pieces F4 screws in each groove of part 1. NBP5R Ⅲ NBP2 Ⅰ NBP5L... - Page 14 F4 x6 Ⅲ Ⅰ Ⅱ Ⅲ Ⅳ Ⅳ NBP2 Pre-place 1 piece of F4 screw into the part 10L/10R. Ⅱ Ⅳ Ⅲ Ⅰ Ⅱ NBP2 Ⅰ Frame Installation Insert 1 piece of F4 screw into the groove of 10R/L, then fix 10R/10L to part 14 with this piece of screw.
- Page 15 P3 x3 S2 x3 PC Panels Installation Ⅰ Ⅲ Ⅲ Ⅲ Ⅱ Ⅲ Ⅱ Don't forget to install the Panel seat S2 before inserting the PC panels. Ⅰ Ⅱ Reinforcing Profile No.15 Installation Ⅱ Ⅰ Ⅰ...
-
Page 16: Top View
Front Wall Installation F4 x4 7 x2 F6 x6 Ⅰ Ⅱ NBP1 NBP1 NBP1 NBP5R NBP5R Ⅲ Corner posts 7# installation Top view NBP1 Ⅰ NBP1 F6 x6 NBP1 NBP1 NBP1 Ⅲ Ⅲ Ⅳ NBP5R Ⅱ Ⅰ NBP1 Ⅱ NBP5L... - Page 17 Front Wall panels Installation P3 x2 Step I: S2 x2 Pre-place 1 piece F4 screw and part C2 into the groove of part 7# accroding to the figure. F4 x Ⅰ Ⅰ Ⅰ Ⅰ Ⅰ Ⅰ Ⅰ Ⅰ Ⅱ Fix the part 15# with part C2.
- Page 18 F4 x16 Ⅱ Ⅰ Installation for Eave Profile 8 F4 x3 F4 x3 F4 x3 F4 x3 Pay attention to the groove in which 2 pieces F4 should be pre-placed. Ⅲ Ⅰ Ⅲ F4 x3 Pay attention to the groove in which 2 Ⅲ...
- Page 19 F4 x12 19 x4 Installation for frame of side walls Ⅰ Step I: Ⅱ Step II: Pre-place 1 piece F4 screw into the middle groove of Fix part 8# onto part 19# with part 19#. the F4 screw pre-placed in 19# at the first step.
- Page 20 F4 x4 19 x2 Install the other eave part 8 in same way Ⅰ Ⅱ...
- Page 21 P4L x2 P4R x2 F4 x2 Insert the panels into the groove Upper Panels Installation of profiles 7# &,9L/R,10L/R. Ⅰ Ⅱ Insert the F4 into the groove of part Insert 2 pieces at each end of part 5#. 9L/R.
- Page 22 Upper Beams No.16 Installation 16 x4 Insert 6+1 pieces F4 screws into the grooves of part 16#. F4 x36 You can put one more screw in each groove. Ⅰ Ⅱ Ⅱ F4 x6 Ⅲ Ⅱ F4 x1 Ⅲ Ⅲ Ⅲ F4x7 F4x7 Ⅲ...
- Page 23 F4 x4 Roof Beam Installation Pre-install 2 pieces F4 screws on each end and then insert the F4 screws into the grooves of part 16#. Insert the screws into the grooves of part 16#. Lock the two screws...
- Page 24 B5 x2 B4 x2 Roof Tri-angle Reinforcing plates Installation Install the metal corner cover B6,B4 and B5 with the screws pre-placed in previous steps.
- Page 25 B5 x2 F1 x2 B4 x2...
- Page 26 Reinforcing Ribs for front & back walls Installation 23 x4 Ⅱ Ⅰ Install the wall reinforcing ribs 23# with pre-placed screws in part 7#, 9R/L,and 10R/L.
- Page 27 Ⅰ Roof Frame Installation 20 x2 B3 x2 F4 x10 Ⅱ Ⅲ...
- Page 28 Roof Frames Screwing Ⅰ 20 x4 F4 x12 Ⅱ Ⅲ...
- Page 29 Assemble the window support Roof Window and Hinges Screwing Ⅰ bar 26# and window frame W1. WINDOW 26 x1 6 x6 F4 x8 WINDOW WINDOW Ⅱ Fix the part 26# onto 20# with screw and part B3. Ⅲ Top view Install the hinge 6# with the pre-placed screws in 9R/9L.
- Page 30 F3 x8 PB03 x4 PB1 x2 Plant Bed Panels Installation PB03 PB03 Assemble parts PB03 and PB1 together with screws F3. PB03 PB03...
- Page 31 Plant Bed Screwing F3 x8 Ⅰ PB03 PB03 NBP2 NBP2 Ⅰ NBP2 Ⅰ Ⅱ PB03 PB03 PB03 NBP1 NBP1 PB03 NBP1 Ⅱ Ⅱ NBP1...
- Page 32 P8 x7 S2 x8 Installation for side wall PC panels Don't forget to install the PC panel seats before inserting PC panels.
- Page 33 Ⅰ Ø6 26 x1 F4 x2 Ø6 Ø6 Ⅱ Ⅲ WINDOW Steps: 1. First remove the screws on the upper part of NO.19. 2. The accessory NO. C2 should installed inside of NO.19. Ⅰ Ⅳ Ⅰ WINDOW Ⅲ F4 x2 Ⅲ...
- Page 34 P9 x7 25 x2 Eaves Installation WD-40 It is easier to install grease or WD-40 when using NO.25 parts in this step.
- Page 35 Installation for Reinforcing Ribs of left wall 22 x2 Ⅰ WINDOW Ⅱ WINDOW Ⅳ Ⅲ...
- Page 36 Installation for Reinforcing Ribs of right wall 22 x2 Ⅰ WINDOW WINDOW Ⅱ Ⅳ Ⅲ...
- Page 37 Instruction for windows operation OPEN CLOSE WINDOW WINDOW...
- Page 38 Installation for front wall and Door F04 x12 F1 x4 L5 x3 L3-1 Ⅰ DOOR L3-1 DOOR DOOR Installation steps: 1. Fix the greenhouse to prevent the location from moving. 2.NO.L3 and NO.L3-1 should be in the same horizontal position. 3.
- Page 39 Silicon Sealing the corners of the greenhouse S5 x2 S6L x2 S6R x2 Silicon Silicon Silicon Silicon Silicon...
-
Page 40: Maintenance
Maintenance: 1.If the ground is not level, the unit may tilt to one side. If you find this is the case, please fix immediately to avoid damage. 2.Please prevent adding any increased weight to the product. 3.Avoid any vine/climbing plants, fruits, or vegetables from growing on the canopy as to not compromise the structure and durability of the product.