Alarm function
You can set two different alarm times with the base station.
Select the required alarm time by pressing the MODE/SET. button (A1 or A2).
1.
Keep the MODE/SET. pressed for approx. 2 seconds, when you have selected the
2.
required alarm time.
The hour display of the alarm time (A1 or A2) flashes.
Using the +/
3.
Press the MODE/SET. button to save the setting.
4.
The minute flashes in the display.
Using the +/
5.
Press the MODE/SET. button to save the setting.
6.
The alarm time is set and activated.
Switch alarm function on and off
The alarm function is switched on an off using the +/
Press 1x:
A1 is active is displayed
34
or -/ /ZONE buttons, set the required alarm hour.
or -/ /ZONE buttons, set the required alarm minute.
button.