Keep the SET/BARO button pressed until the display that shows the air pressure
1.
begins to flash.
Using the BARO- / BARO+ buttons, set the air pressure. Pay attention to what is
2.
shown in the display.
Then, press SET/BARO again.
3.
If you keep the BARO- / BARO+ pressed, the values move forward more
quickly.
About the time signal
General
The radio-controlled clock that is integrated into the weather station receives its radio
signals from the time indicator signal MSF.
As soon as the base station is supplied with power by the batteries, it switches onto
receiving and searches for the signal from transmitter MSF. If the time signal has been
received through the ferrite bar antenna built into the radio-controlled alarm clock at
a sufficient strength, the date and time will be shown in the display.
22