Start Radio Reception Automatically - ALDI Sempre GT-WS-10s Operating Instructions Manual

The base station switches on several times a day and synchronises its time with the
radio signal from transmitter MSF. In the case of non-receipt, e.g. with strong lightning
storms, the device continues to run accurately and only switches to receiving
automatically at the next designated time.

Start radio reception automatically

When the batteries are inserted in the base station, all indications will briefly been
shown in the display. The display will also briefly illuminate and sound a beep tone.
After this, the device switches to receiving, whereby the radio wave number
shows the quality of the reception: The more radio waves are displayed, the
better the reception.
As soon as the signal is received with sufficient strength, the relevant data is shown in
the display and the transmitter tower symbol is constantly displayed. This process can
take a few minutes.
Effective immediately, the weather station switches to receiving several times a day
and compares the displayed time with that from the time signal transmitter.
If no sufficiently strong signal is received, the base station will discontinue the
receiving process and the transmitter tower symbol extinguishes. The receiving
process is started again later.
23