Set Time And Date Manually - ALDI Sempre GT-WS-10s Operating Instructions Manual

In this case, the time continues to run normally, from the start time of "00:00".
First, check whether the location of the base station is suitable, see page 27.
You can restart the receiving process again manually, see page 23, or
Wait until the base station automatically switches to receiving again later.
Reception is usually better during the night.
If reception is not possible at your location, you can set the time and date
manually, see next chapter.

Set time and date manually

Keep the MODE/SET. pressed until the year flashes in the display.
1.
Using the +/
2.
Press the MODE/SET. button to save the setting.
3.
The month flashes in the display.
Using the +/
4.
Press the MODE/SET. button to save the setting.
5.
The date flashes in the display.
Using the +/
6.
24
or -/ /ZONE buttons, set the year.
or -/ /ZONE buttons, set the month.
or -/ /ZONE buttons, set the date.