PROBLEM
Self Clean function
Double oven models
only:
I cannot select the
Self clean function
I have cancelled a
Self Clean cycle but
cannot use the oven:
the oven door will
●
not open
the display is still
●
counting down
minutes or showing
0h 00m
COOLING is showing
●
in the display
●
the knobs and buttons
●
are unresponsive.
The oven is beeping
and the display shows
A2 or A3
There is a power cut
during a Self Clean
cycle
44
TROUBLESHOOTING
POSSIBLE CAUSES
One oven is already turned
on or set for automatic
cooking.
This is normal:
if COOLING is showing in the
display, you have successfully
cancelled the Self Clean cycle.
However, the oven is still too
hot to be used for cooking
and needs to cool down.
See section 'Alert codes' for instructions.
Power cut.
WHAT TO DO
You cannot start a Self Clean
cycle when one oven already
has a function selected.
Turn the function knob to
Off and try again.
Wait until the cool-down
phase has finished.
A long tone will sound
and the oven door will
automatically unlock when
the oven is ready to use.
Note: depending on when
the Self Clean cycle was
cancelled, the cool-down
phase may take up to 45
minutes.
The door will remain locked.
Once the power is turned
back on, the door will remain
locked until the oven has
cooled to a safe temperature.