Zen Float Tank Assembly Instructions Manual page 7

Use heating pads only as directed. Confirm that the heating
element in the heating pad is facing upward. While the heating
pad is activated, do not leave in contact with any object other
than the waterproof liner as directed, and avoid direct contact
LOAD BEARING CAPACITY &
WATER
The Float Tank is intended for use by one person at a time.
Confirm that floor load bearing capacities are able to support
the Float Tank weight when filled and occupied. Calculate at
approximately 70 lbs (31.7 kg) per square foot + body weight.
4. INFLATE FLOAT TANK
There are six different valves on the float tank you will need to inflate to
complete the process (left wall valve​ #1​ , right wall valve ​ # 2​ , rear wall valve
#3​ , lower front wall valve ​ # 4​ , door frame valve ​ # 5​ , door valve ​ # 6​ ) .
Remember to continually check the psi gauge on the pump so that each
section of the tank is at the target 6 psi.
BURNS
of skin with the heating pad.
7