Zen Float Tank Assembly Instructions Manual page 4

1. CHOOSE PROPER PLACEMENT
Choose a prefered location that will be at least 68 degrees Fahrenheit.
Allow at least 1 ft (30 cm) of space between the Float Tank and room walls
for maintenance.
NOTE:​ It is recommended to place your tank in a room that maintains
approx. 70 degrees F or higher.
2. INFLATE TANK BASE
Start by taking the supplied inflation pump (see ​ C ONTENTS​ page for
inflation pump reference) and inserting it into the valve, turn it to the right
until you have an air-tight seal. Inflate the tank base until you have reached
6 psi maximum. After the pump gauge reads the proper psi the tank base
should feel solid.
NOTE: After inflating each section of the tank ensure there are no
punctures caused during transit. If you notice anything is damaged please
contact us immediately.
Tel: 801-871-5140
Email: ​
i nfo@zenfloatco.com
4