Front Panel Control - I-Inc IF171ABB User Manual

FRONT PANEL CONTROL

Power Button:
•
Press this button to switch ON/OFF of monitor's power.
Power Indicator:
•
Green — Power On mode.
Orange — Power Saving mode.
MENU / ENTER:
•
Activates the OSD menu or confirms adjustments to settings.
Adjust◄/►:
•
Navigate through adjustment icons when OSD is ON or adjust a function when function is
activated.
i Button: (for D-sub only)
•
When OSD menu is in off status, press and hold this button for more than two seconds to activate
the Auto Adjustment function.
(The Auto Adjustment function is used to optimized the H-Position, V-Position, Clock and Phase.)
NOTES:
Do not install the monitor in a location near heat sources such as radiators or air dusts, or in a
•
place subject to direct sunlight, or excessive dust or mechanical vibration or shock.
Save the original shipping box and packing materials, as they will come in handy if you ever have
•
to ship your monitor.
For maximum protection, repackage your monitor as it was originally packed at the factory.
•
To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be
•
removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents
such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.
Function Key Lock:
•
Press the 「◄」 , 「►」 and the 「Menu」 buttons simultaneously to enable the Function Key Lock.
When the Function Key Lock is enabled, only the Power button is active. Press the 「 ◄, 「►」 and
the「Menu」buttons simultaneously again to unlock the function keys.
11
User's Manual