Table of Contents
Advertisement
Horn switch "
"
Press this switch to sound the horn.
Engine stop switch "
/
Set this switch to "
" before starting
the engine. Set this switch to "
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
Start switch "START"
Push this switch to crank the engine
with the starter.
CAUTION:
See page 5-1 for starting instruc-
tions prior to starting the engine.
INSTRUMENT AND CONTROL FUNCTIONS
EAU12500
Clutch lever
EAU12660
"
" to
EAU12690
1. Clutch lever
The clutch lever is located at the left
handlebar grip. To disengage the
clutch, pull the lever toward the handle-
ECA10050
bar grip. To engage the clutch, release
the lever. The lever should be pulled
rapidly and released slowly for smooth
clutch operation.
The clutch lever is equipped with a
clutch switch, which is part of the igni-
tion
circuit
page 3-13.)
EAU12820
1
cut-off
system.
(See
3-3
Shift pedal
1
1. Shift pedal
The shift pedal is located on the left
side of the engine and is used in com-
bination with the clutch lever when
shifting the gears of the 6-speed con-
stant-mesh transmission equipped on
this motorcycle.
EAU12870
2
3
4
5
6
7
8
9
Advertisement
Table of Contents
Troubleshooting
