Yamaha TT250RX 2007 Owner's Manual page 26

INSTRUMENT AND CONTROL FUNCTIONS
1
1
2
3
1. Rubber cap
4
2. To increase the damping force and
thereby harden the damping, turn
the adjusting screw on each fork
5
leg in direction (a). To decrease
the damping force and thereby
6
soften the damping, turn the ad-
justing screw on each fork leg in di-
7
rection (b).
8
9
(b)
1. Damping force adjusting screw
Damping setting:
Minimum (soft):
20 clicks in direction (b)*
Standard:
11 clicks in direction (b)*
Maximum (hard):
1 click in direction (b)*
* With the adjusting screw fully turned
in direction (a)
CAUTION:
Never attempt to turn an adjusting
mechanism beyond the maximum or
minimum settings.
3. Securely install the rubber caps.
3-10
CAUTION:
Be sure to install the rubber caps to
prevent dust, etc. from entering the
fork legs.
1
NOTE:
Although the total number of clicks of a
(a)
damping force adjusting mechanism
may not exactly match the above spec-
ifications due to small differences in
production, the actual number of clicks
always represents the entire adjusting
range. To obtain a precise adjustment,
it would be advisable to check the num-
ber of clicks of each damping force ad-
justing mechanism and to modify the
specifications as necessary.
ECA10100
ECA10960