Front Wheel; Rear Wheel - Yamaha TT-R230V 2005 Owner's Manual

Front wheel

To remove the front wheel
● ● ● ● ●
It is advisable to have a Yamaha
dealer service the wheel.
● ● ● ● ●
Securely support the motorcycle
so that there is no danger of it
falling over.
1. Loosen the wheel axle.
2. Lift the front wheel off the ground
according to the procedure on page
6-26.
1. Axle nut
PERIODIC MAINTENANCE AND MINOR REPAIR
3. Pull the wheel axle out, and then
remove the wheel.
Do not apply the brake after the wheel
has been removed together with the
brake disc, otherwise the brake pads
will be forced shut.
To install the front wheel
1. Insert the wheel axle, and then
tighten it to the specified torque.
Tightening torque:
Wheel axle:
80 Nm (8.0 m.kgf, 58 ft.lbf)
2. While applying the front brake, push
down hard on the handlebars
several times to check if the front
fork compresses and rebounds
smoothly.
6 - 2 7

Rear wheel

To remove the rear wheel
● ● ● ● ●
It is advisable to have a Yamaha
dealer service the wheel.
● ● ● ● ●
Securely support the motorcycle
so that there is no danger of it
falling over.
1. Remove the brake adjuster.
2. Remove the brake rod from the brake
cam lever
3. Loosen the axle nut
1. Adjuster
2. Brake rod
3. Brake cam lever
4. Axle nut
6