Subscribe to Our Youtube Channel
Related Manuals for Hussmann R3H
Summary of Contents for Hussmann R3H
- Page 1 R3H, R3HTO, R3HA,R3Combo Hot Service/Self-Service/ Case with Self Service Front p/n IGFP-R3, R3H, R3P, R3HA-0208 INSTALLATION & OPERATION GUIDE...
-
Page 2: Table Of Contents
HUSSMANN CHINO PRODUCT CONTROL The serial number and shipping date of all equipment has been recorded in Hussmann’s files for warranty and re- placement part purposes. All correspondence pertaining to warranty or parts ordering must include the serial num- ber of each piece of equipment involved, in order to pro- vide the customer with the correct parts. -
Page 3: Cut & Plan Views
Rev.0208 12x20 Drop-In Well Service Hot / Self Service Case Scale=1/2" " " Water Reservoir " R3HA Circulated Hot Air Merchandiser 8" DRAIN & ELEC. STUB UP 18" X 18" CASE FRONT 8-2" (Variable Lengths) Plan View = 1/4” Cut & Plan Views Electrical Plug 115VAC REF. -
Page 4: Installation
B. When wedges are involved in a lineup, set them first. JOINING R3H, R3HA, R3 Combo's All cases were leveled and joined prior to shipment to insure the closest possible fit when cases are joined in the field. -
Page 5: Joint Trim
Suction lines should be insulated with a nonabsorbent insulation material such as Armstrong’s Armaflex. spaces (between refrigerators or between a refrigerator and a wall), provide means to prevent freezing. The water seal should be insulated to prevent condensation. R3H, R3HA with refrigerated front... -
Page 6: T-Stat Location
It is located in the front at the right side of the case under the fan plenum near the TX valve. IGFP-R3H, R3HTO, R3HA, R3Combo-0208 THERMOSTATIC EXPANSION VALVE LOCATION This device is located on the same side as the refrigera- tion stub. -
Page 7: Electrical
CLEANING Hussmann recommends using a clean damp chamois, or a paper towel marked as dust and abrasive free with 210 Plastic Cleaner and Polish available by calling Sumner Labs at 1-800-542-8656. -
Page 8: Tips & Troubleshooting
Hussmann cases were not designed to “heat up” or “cool down” product—but rather to maintain an item’s proper temperature for maximum shelf life. To achieve the pro- tection required always: 1. - Page 9 Rev.0208 within a few hours. Any attempt to use the hot table to display large amounts of food for long periods of time will result in dehydrated, overcooked and unsafe food. The qual- ity of food will progressively worsen as the length of time increases.
-
Page 10: Operating Instructions
R3H, R3HTO Section Startup OPERATING INSTRUCTIONS Griddle OVERHEAD LIGHTS ON / OFF TURN SWITCHES Check to make sure all lights come on at start-up. If they do not contact your Service Department POWER ON / OFF Control Panel on Rear of Case Number of controls may vary. - Page 11 Rev.0208 R3HA, R3HATO Hot Circulation Air Startup and Operation Main Power Startup: 1. Turn the Main Power Switch ON. (This will enable all other switches in the case). 2. Turn Lights & Fans Switch ON. 3. Turn Water Fill System ON. (For 100% DRY Heat leave water system OFF). 4.
-
Page 12: Case Specifications
Determine case loads by combining Cold Prep and Hot Top sections of the Hot and Cold Case Specs. R3 Refrigerated Self Service Front 15° 36° 24° 15° 36° 24° 15° 36° 24° 15° 36° 24° 15° 36° 24° R3H (Hot Top Only) GRIDDLES NUMBER LENGTH QTY. SIZE SHELVES 3' &... -
Page 13: Schematics
Rev.0208 Schematics R3 Combo Hot & Cold Tops, Refrigerated Front... - Page 14 IGFP-R3H, R3HTO, R3HA, R3Combo-0208 Schematics...
- Page 15 Rev.0208 Schematics...
-
Page 16: Hot Top & Hot Front
IGFP-R3H, R3HTO, R3HA, R3Combo-0208 Schematics Hot Top & Hot Front... - Page 17 Rev.0208 Schematics...
- Page 18 IGFP-R3H, R3HTO, R3HA, R3Combo-0208 Schematics...
-
Page 19: Hot Top & Front Self Service Cold
Rev.0208 Schematics Hot Top & Front Self Service Cold... - Page 20 IGFP-R3H, R3HTO, R3HA, R3Combo-0208 Schematics...
- Page 21 Rev.0208 Schematics...
- Page 22 IGFP-R3H, R3HTO, R3HA, R3Combo-0208 Schematics...
- Page 23 Rev.0208 Schematics...
- Page 24 IGFP-R3H, R3HTO, R3HA, R3Combo-0208 Schematics...
- Page 25 Rev.0208 Schematics Schematics...
- Page 26 IGFP-R3H, R3HTO, R3HA, R3Combo-0208 Schematics...
- Page 27 Rev.0208 Schematics...
- Page 28 IGFP-R3H, R3HTO, R3HA, R3Combo-0208 Schematics...
- Page 29 Rev.0208...
- Page 30 IGFP-R3H, R3HTO, R3HA, R3Combo-0208...
- Page 31 Rev.0208...
- Page 32 IGFP-R3H, R3HTO, R3HA, R3Combo-0208 Schematics...
- Page 33 Rev.0208 Schematics...
-
Page 34: Appendices
1.1 The installer is responsible for following the installation instruc- tions and recommendations provided by Hussmann for the installation of each individual type refrigerator. 1.2 Refrigeration piping should be sized according to Hussmann's equipment recommendations and installed in accordance with normal refrigeration practices. Refrigeration piping should be insulated according to Hussmann’s recommendations. -
Page 35: Appendix C. - Field Recommendations
20. Has the equipment been modified to use replacements for CFC-12, CFC-502 or other refrigerant? If so, have the modifications been made in accordance with the recommendations of Hussmann's equipment? Is the refrigerator charged with the proper refrigerant and lubricant? Does the system use the recommended compressor? 1.0 The most consistent indicator of display hot case performance is... -
Page 36: Appendix D. - Recommendations To User
1.2 Load levels as defined by Hussmann must be observed. 1.3 The best preservation is achieved by following these rules: a) Buy quality products. - Page 37 Rev.0208 towel. 10. When “freshening” foods such as macaroni and cheese with added water, heat the water in a clean container until it is 10° to 20°F above the desired holding temperature of the food. This will keep the food at a safe serving temperature. Depending on the amount of water, the temperature can drop 10°...
- Page 38 IGFP-R3H, R3HTO, R3HA, R3Combo-0208...
-
Page 39: Limited Warranty
This warranty is made to the original user at the original installation site and is not transferable. Hussmann merchandisers are warranted to be free from defect in material and workmanship under normal use and service for a period of one (1) year from the date of original installation (not to exceed fifteen (15) months from the date of shipment for the factory). -
Page 40: Hussmann ® Chino 13770 Ramona Avenue • Chino, California
The MODEL NAME and SERIAL NUMBER is required in order to provide you with the correct parts and information for your particular unit. They can be found on a small metal plate on the unit. Please note them below for future reference. MODEL: SERIAL NUMBER: IGFP-R3H, R3HTO, R3HA, R3Combo-0208...
Need help?
Do you have a question about the R3H and is the answer not in the manual?
Questions and answers