Page 1
ENJOY YOUR FOUNTAIN AT NIGHT BY ADDING LIGHTS! 3 Pack Fountain Light Kit Blue Thumb Item# PB2897 Email a Picture of your completed installation to sales@bluethumbponds.com Fountain Vase Installation Manual *Blue Thumb proudly manufactures their products in Saginaw, Michigan...
Page 2
The pictures used to illustrate the installation are of the Altum AquaBox, STEP 4 but the procedures are the same for all Blue Thumb basins. Set basin in the hole and verify that the box top is level and approximately 1”...
Page 3
After the basin is properly filled and your vase is running at the hose to the vase using the quick-disconnect shims to ensure the vase is desired effect, cover the top of the basin using the Blue Thumb connector. The vase should be centered on level. The vase should never Polished Pebbles to finish of the beautiful look.
Page 4
ROUTINE WATER TREATMENT This will turn the pump off once water drops below Use Blue Thumb water treatments weekly at first and eventually bi-monthly or the sensor attached to the pump preventing the monthly depending on product selection, time of season, and conditions of the pump from overheating and causing permanent fountain.
Need help?
Do you have a question about the Fountain Vase and is the answer not in the manual?
Questions and answers