Nexcelom Bioscience Cellometer Auto T4 User Manual page 14

Instrument System Hazard
Read the instructions, warnings and cautions provided with the instrument before using.
WARNING: Inspect instruments and cables for breaks, cracks, nicks and other damage before every
use. This may be done visually under magnification or with a high voltage insulation testing device.
If damaged, do not use. Damaged instruments or cables may result in injury to the user.
CAUTION: The instrument is designed to accept only one slide at a time. Do not attempt to load more
than one slide into the sample slot. Doing so will cause an error and could damage the instrument.
CAUTION: Do not stack equipment on top of the Instrument or place the Instrument on top of
electrical equipment. This is an unstable configuration and does not allow for adequate cooling.
In addition, it is recommended that as much distance as possible be provided between the
instrument and any equipment emitting a high vibration signature. High levels of vibration may affect
clarity of the image being viewed.
WARNING: Do not remove the instrument cover. Contact Nexcelom Support for assistance at
+1 (978) 327-5340 or via email:
Servicing Hazard
No one other than Nexcelom-authorized personnel may service inside the protective cover of the Auto T4
instrument system.
CAUTION: Do not pull the system by the connectors. Toppling of the system or causing damage to the
system may result in the instrument no longer functioning as expected.
8001009 Cellometer® Auto T4 User Manual Rev C
support@nexcelom.com
Chapter 2. Equipment Safety
8