Chapter 2. Equipment Safety; Potential Hazards - Nexcelom Bioscience Cellometer Auto T4 User Manual

Chapter 2. Equipment Safety

As with any equipment that involves moving parts, there are potential hazards involved in the operation and
maintenance of this instrument. This chapter identifies potential hazards and suggests precautions to avoid them.

POTENTIAL HAZARDS

This section describes instrument safety features designed to minimize potential hazards. Before using the system,
familiarize yourself with this information.
WARNING: No modification of this equipment is allowed. Modification of equipment can result in
improper operation causing possible injury.
In the United States, the facility operating the instrument should follow all OSHA Manual lines and
applicable ANSI standards for the safe use of this instrument.
Customer and operator agree that it is their sole responsibility to fully understand and comply with
local, state, and federal laws, rules and regulations in the use of this system.
Cables and accessories not specified within the instructions for use with this instrument are not
authorized. Using other cables and/or accessories may adversely impact safety and performance.
Note: The Auto T4 instrument should not be used adjacent to or stacked with other equipment unless specified by
Nexcelom. If the system must be used adjacent to or stacked with other equipment, then observe the instrument
in its configuration to verify instrument operation is normal and functions as expected.
Electrical Hazard
No part of the exterior housing should be removed. Do not open the instrument cover. Contact Nexcelom Support
at +1 (978) 327-5340 or via email:
WARNING: To avoid the risk of electrical shock, this equipment must only be connected to a
grounded electrical outlet.
In addition, ensure electrical supply plug is not obstructed and can be reached by users to
disconnect the device if necessary.
8001009 Cellometer® Auto T4 User Manual Rev C
support@nexcelom.com
7