Table of Contents
Advertisement
10 sec after the last operation, the timer display changes to the timer that
will run out next.
The assignment of that timer is displayed always by a flashing Cooking
Zone Indicator. How many timer are running you can identify by the number
of Cooking Zone Indicator that are statically on.
By toggling
, you can display the timer values for the heater timer and
the minute minder. The assignment is always indicated by the flashing
Cooking Zone Indicator. If no Cooking Zone Indicator flashes, the minute
minder time is shown in the 2-digit Timer Display.
All heater timers can be erased by switching off the appliance into the S-
until run out.
To erase a timer in Operation Mode, you first have to select the timer by
toggling the Active/Deactive Timer Button until it is displayed. The value
can be erased then in 2 different ways:
· Decrement by touching
until ´00` appears on the Timer Display.
· Touch
and
simultaneously for 0,5sec until ´00` is shown in Timer
Display.
set to ´0`.
The heater timer or minute minder run out is indicated acoustically by a
buzzer tone. This will be erased by touching any button for acknowledgement.
Key Lock
Key lock functionality is for blocking and set the appliance into a save
modus during operation. Touch modifications as for example rise heat
settings and others should not be possible. It is only possible to switch the
appliance off.
The lock function is active, if the Key Lock button
is pressed at least 2
of more than 2 sec, the Key Lock Indicator flashes and the heater is locked.
The heater can only be locked in Operating Mode (B-Mode).
17
Advertisement
Table of Contents
