Courion iLEARN System Manual page 12

COURION Logo Screen - Press the MENU/SELECT Button.
System Status Screen - System OK
NOTE: If this screen indicates something other than SYSTEM OK,
please proceed to the TROUBLESHOOTING and ERROR MESSAGES
Section at the back of this Manual.
If you received an iSYSTEM Software Update Kit with your order, update the iLEARN Door
Control and iDRIVE software by following the instructions in Courion's iSYSTEM Software
After successfully updating the iSYSTEM Software, re-cycle the iLEARN Door Control power (110
VAC) and iDRIVE Hoistway power (240 VAC).
3. Initial Operation
a. Insure that all of the Hoistway Doors and Car Gates are in the FULL CLOSE Position.
b. Utilizing the Hall or Car Station Push Buttons, open and close the Hoistway Doors.
To ADJUST the Hoistway Door(s) Operation (if required), press the MENU/
SELECT Button and turn to DOOR PARAMETERS.
12
iLEARN System Manual
Update Manual.
ver.071217-2.10