Shipping To The Beha Customer Service; Repair; Technical Specifications - MANDREL welder EErgo Instruction Manual

3.3 Shipping to the BEHA customer service

Please always register the BEHA EErgo hot paddle welder by phone or
e-mail before sending it to BEHA customer service. The goods must al-
ways be declared with the IncoTerm "DDP" (delivered duty paid). In this
way you avoid a possible rejection at customs and additional extra costs.
Please refer to the return note for the declaration of the repair (see www.
mandrel-welder.com).

3.4 Repair

Should the machine fail despite careful manufacturing and testing proce-
dures, the repair must only be carried out by an authorised BEHA custom-
er service centre.
If it is necessary to replace the connecting cable, this must be done by the
manufacturer or his representative in order to avoid safety hazards.

4.0 TECHNICAL SPECIFICATIONS

Admissible ambient
temperature:
Operating voltage:
Heating-up period:
Power:
Welding temperature:
Indicator:
Welding mirror:
Altitude for operation:
Maximal humidity:
16
0...40°C (32...104°F)
EErgo 230 V: 230 V / 220 V AC, 50/60Hz
EErgo 115 V: 115 V AC, 50/60Hz
approx. 5 minutes
120 W
PP:
200°C, ± 10°C; 392°F, ± 10°F
Nylon / TPEE / TPX:
260°C, ± 10°C; 500°F, ± 10°F
2 red / green LEDs
Teflon coated
max. 2000 m
80%, 40°C (104°F)