Service / Maintenance; Shipping Information; Preventive Maintenance - MANDREL welder RSX01 Instruction Manual

Switch on the machine (3) Important: only with clamped hose mandrel, risk of
voiding parts (profile jaws)!
After reaching the max. speed of the motor, start the welding process by pressing
the release button (7) (clamping jaws move together).
If a continuous welding bead has formed around the hose mandrel, switch off the
machine (3).
Welding process is finished.
Leave hose mandrel clamped for 2-3 min. in the machine to cool off.
Even after removing the hose mandrel, let it cool down for another 5 minutes before
the welding point is loaded.
To remove the hose mandrel, first open the head bolt (10), only then move the
welding jaws apart with the external hexagon (5) to simplify the removal of the hose
mandrel.
Now the next welding process can be performed.

3 SERVICE / MAINTENANCE

3.1 SHIPPING TO THE BEHA-CUSTOMER SERVICE
Please always register the RSX01 friction welding machine by phone or e-mail
before sending it to BEHA customer service. The goods must always be declared
with the IncoTerm "DDP" (delivered duty paid). In this way you avoid a possible
rejection at customs and additional extra costs. Please refer to the return note for
the declaration of the repair (see www.mandrel-welder.com).

3.2 PREVENTIVE MAINTENANCE

To work effectively and surely keep the machine and the ventilation slots clean at all
times.
After an operating time of approx. 150-200 hours we recommend a preventive
maintenance of the RSX01 friction welding machine at an authorised BEHA service
centre.
8