Replacing The Auxiliary Light Bulb - Yamaha YS125-5C 2016 Owner's Manual

4. Disconnect the headlight coupler,
then remove the headlight bulb
cover.
1
1. Headlight coupler
2. Headlight bulb holder
5. Unhook the headlight bulb holder,
then remove the burnt-out bulb.
1
1. Headlight bulb holder
2. Headlight bulb
6. Place a new headlight bulb into
position, then secure it with the
bulb holder.
7. Install the headlight bulb cover,
then connect the headlight cou-
pler.
8. Place the headlight unit in its orig-
2
inal position, and then tighten the
headlight unit stay bolt to the
specified torque.
Tightening torque:
Headlight unit stay bolt:
7 N·m (0.7 kgf·m, 5.1 lb·ft)
9. Install the bolt on each side.
10. Place the headlight unit side cov-
ers in their original position, and
then install the screw on each
2
side.
11. Have a Yamaha dealer adjust the
headlight beam if necessary.
Periodic maintenance and adjustment
6-34
Replacing the auxiliary light
bulb
If the auxiliary light bulb burns out, re-
place it as follows.
1. Remove the headlight unit. (See
page 6-33.)
2. Remove the auxiliary light bulb
socket (together with the bulb) by
pulling it out.
1
1. Auxiliary light bulb
2. Auxiliary light bulb socket
3. Remove the burnt-out bulb by
pulling it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by pushing it in.
6. Install the headlight unit.
EAU45226
6
2