Electrum Sabercrafts Smart Saber Aegis Operation Manual page 5

Basic Operation
Blaster Mode
Activation
Blaster Mode
To enter Blaster Mode, hold the saber in a vertical position (blade up) within the range you
set in the Unity App (Default 70°). While in this position, hold the bottom switch button until
the LEDs on the plate flash to activate the mode. Once Blaster Mode is active, swing the
saber to create blaster effects. To toggle a "Force Effect", push the saber in a straight line
outward. Hold the saber still outside of the range to deactivate, or hold the bottom button
again while in a vertical position.
Using the Unity App, you can set the saber to use "Manual Blaster" This will default to the
bottom switch button, and will activate effects when you tap the bottom switch button.
Blaster Mode and Force Effects will only activate if the sound font in use contains
blaster sound files or force files. If they are not present, the saber will not enter
Blaster Mode.
Manual Blaster cannot be activated if Auto Lockup is set to OFF in the Electrum Unity
App.
Find more information at ElectrumSabers.com/Resources
Blaster Effect
Motion
Force Effect
Motion
5