Electrum Sabercrafts Smart Saber Aegis Operation Manual page 3

Basic Operation
Top Button
Middle Button
Towards Pommel
Auto Sleep Mode
The Diatium3 Smart Saber features an intelligent "Sleep Mode", that conserves power
automatically when it is not in use. This mode activates after a period of time you set in
"Switch Settings" on the Electrum Unity App (default 10 min). When this mode is triggered,
the saber will not activate. To disengage Sleep Mode, hold the center switch until all leds on
the switch flash. The saber will play a boot sound, and you'll be able to activate the saber.
Touch Switch Operation
Each Electrum Saber Touch Switch has 3 points of activation: the top, middle, and bottom
buttons. These each have a special feature associated with them.
To activate the saber, take the saber out of Deep sleep, and wait until a boot sound plays*.
This sound is different for every Sound Font. After you hear the sound, hold the bottom switch
button to power on the saber blade. You can also set a slide motion: slide your finger from
the bottom to the middle, based on options set on the Electrum Unity App. To deactivate the
saber, hold the top switch, or set up the saber with the app to slide from top to middle using
the Electrum Unity App.
*The switch automatically calibrates to the environment after taking the saber out of
deep sleep. After taking the saber out of Deep Sleep, always wait until a boot sound
plays before attempting to use the switch in order to calibrate properly.
Find more information at ElectrumSabers.com/Resources
Towards Blade
Bottom Button
Boot from Sleep
Mode
3