Wrapping Boards Installation Instructions - Hussmann CR3-F Installation And Operation Manual

Combination service and self-service meat/fish case with rear storage

Hide thumbs Also See for CR3-F:

Table of Contents

rev. 0608

installation (Cont'd)

wrapping boards installation instructions

Step : Measure 10 inches from top of the case.

Step 1: Measure 6 inches from wrapping board end.

note:

line up 6 inch mark with 10 inch mark.

Step 3: Use bracket center hole to align with cross mark.

note: Use pencil/marker to mark hole pattern.

HOLE PATTERN

Step 4: Drill holes (7/3")

Screws # 14 X 1"

Step 5: Install bracket with screws (provided)

note:

repeat Steps 1 thru 5 for Second bracket installation.

Table of Contents

Show Quick Links

Table of Contents

Cr3-m R3 R3-m R3-f