Related Manuals for Hussmann CR3HTO-HTB
Summary of Contents for Hussmann CR3HTO-HTB
- Page 1 CR3HTO-HTB Hot Counter-top ServiCe CaSe p/n iGFC-Cr3H-HtB-0508 INSTALLATION & OPERATION GUIDE...
-
Page 2: Table Of Contents
Hussmann Chino product Control The serial number and shipping date of all equipment has been recorded in Hussmann’s files for warranty and replacement part purposes. All correspondence pertaining to warranty or parts ordering must include the serial number of each piece of equipment involved, in order to provide the customer with the correct parts. -
Page 3: Case Drawings
rev. 0508 36" 6' Electrical electrical cord Case Drawings Timers " " " nSF installation note PER NSF INSTALLATION REQUIREMENT SEAL AROUND CASE TO BASE PERIMETER WITH NS F APPROVED SEALANT " 48" " 6' Electrical electrical cord... -
Page 4: Installation
The refrigerated merchandisers have been designed for use only in air conditioned stores where temperature and humidity are maintained at or below 75°F and 55% relative humidity. DO NOT allow air conditioning, electric fans, open doors or windows (etc.) to create air currents around the merchandiser, as this will impair its correct operation. -
Page 5: Field Wiring And Serial Plate Amperage
Cleaning Hussmann recommends using a clean damp chamois, or a paper towel marketed as dust and abrasive free with 210 plastic Cleaner and polish available by calling Sumner Labs at 1-800-542-8656. -
Page 6: Glass
Glass The non-glare glass supplied in your case has a specialized Anti-Reflective coatings on the surface of the glass. These coatings reduce the glare from lighting so that the products in your display are more visible to your customers. While the anti reflective coatings are durable, they are susceptible to scratching if abrasive materials or liquids are used for cleaning. -
Page 7: Replacing Fluorescent Lamps
3. If frost is collecting on fixture and/or product, check that no outside doors or windows are open allowing moisture to enter store. These merchandisers were designed for use in stores were temperature & humidity does not exceed 75°F and 55% H. -
Page 8: Case Startup
Controls The controls are located at the rear of the case. FRONT GRIDDLE INITIAL SETTING "4" 430-01-0365 9810 Control Panel on Rear of Case Number of controls may vary. temperature adjustment allow case preheat for 45 minutes prior to loading. note: this equipment is not designed to heat-up or cook food. -
Page 9: Electrical Wiring Diagrams
rev. 0508 • To change a time, press the desired product / pan number key. The display will change to the existing set time. Press the up or down arrow keys to change to the desired time. To change another key press that product key and follow the same procedure. -
Page 10: Wiring Diagrams
iGFC-Cr3H-HtB-0508 wiring Diagrams... - Page 11 rev. 0508 wiring Diagrams (Cont'd)
- Page 12 iGFC-Cr3H-HtB-0508 wiring Diagrams (Cont'd)
- Page 13 rev. 0508 wiring Diagrams (Cont'd)
- Page 14 iGFC-Cr3H-HtB-0508 wiring Diagrams (Cont'd)
- Page 15 rev. 0508 wiring Diagrams (Cont'd)
- Page 16 iGFC-Cr3H-HtB-0508 wiring Diagrams (Cont'd)
- Page 17 rev. 0508 wiring Diagrams (Cont'd)
- Page 18 iGFC-Cr3H-HtB-0508 wiring Diagrams (Cont'd)
- Page 19 rev. 0508 wiring Diagrams (Cont'd)
- Page 20 iGFC-Cr3H-HtB-0508 wiring Diagrams (Cont'd)
- Page 21 rev. 0508 wiring Diagrams (Cont'd)
-
Page 22: Appendices
D. – recommendations to user 1.0 Hussmann should provide instructions and recommendations for proper periodic cleaning. The user will be responsible for such cleaning, including the cleaning of equipment within the compartment and the hot area(s). - Page 23 Liquid NuSteel Scour with a small amount of a dry cloth Paste NuSteel Household Cleaners Rub with a damp cloth Coopers Stainless Steel Cleaner Allen Stainless Steel Polish For further technical information, please log on to http://www.hussmann.com/products/cr3to-htb.htm appendices (Cont'd)
- Page 24 __________________________________________________________________________________________________ _______________ __________________________________________________________________________________________________ _______________ __________________________________________________________________________________________________ Additional copies of this publication may be obtained by contacting: Hussmann® Chino 13770 Ramona Avenue • Chino, California 91710 (909) 68-894 FAX (909) 590-4910 (800) 395-99 /Chino The MODEL NAME and SERIAL NUMBER is required in order to provide you with the correct parts and information for your particular unit.