Table of Contents
Advertisement
UNPACK YOUR PRODUCT
Remove the Vacuum Seal Drawer and accessories box from the packaging. Recycle the
materials that can be reused. Dispose packaging materials in accordance with local regulations
on waste disposal.
Inspect the Vacuum Seal Drawer for any signs of damage. Do not install the
Vacuum Seal Drawer if it has been damaged. If the product is damaged, contact your local
Fisher & Paykel dealer.
6
All electrical work must be done by a qualified electrician, or a Fisher & Paykel trained and
supported service technician.
Supply
Service
Maximum Power
Power outlet*
Power cord (total length)
* The power outlet must be earthed and located within 35 7/16" (900mm) of the centre rear of the product.
RECYCLE
RESPONSIBLY
ELECTRICAL SPECIFICATIONS
VB60S
220-240 VAC, 50/60 Hz
10 amp circuit
320 W
3-prong grounding-type
1800mm
Advertisement
Table of Contents
