Table of Contents
Advertisement
Assembly
Assemble the fork arms on the fork carrier in the following order:
1.
Prepare the lifting device for large loads, e.g., indoor crane and lifting straps. The
work must be carried out by 2 people.
2.
Move the fork carrier to the vertical position and move it to a height that allows for
safe and comfortable assembly of the fork arms.
3.
Remove the locking screw on the assembly side of the fork carrier.
Fig. 7: Locking device, fork arm with hook suspension
4.
Open the locking device of the fork arms. To do so, put the lever (Fig. 7/1) of the
locking device vertically upwards (Fig. 7/3).
5.
Secure the fork arm with the lifting device (e.g., using a crane and belts). Raise it
to a height that allows for the fork carrier to be enclosed by both hooks.
Fork carrier with fork arms
Assembly
Fork arms with hook suspension
23
Advertisement
Table of Contents
