Vetter ManuTel Operation Manual page 13

Hard stamping
NOTICE
The hard stamping identifies (via the article number it contains) the version of the fork
arm upon delivery. Fork arms without a marking must not be put into operation. The
hard stamping of the fork arm is located on the fork back at the side (Fig. 2).
The use of the fork arms without the prescribed markings is considered incor-
rect use.
Fig. 2: Hard stamping of the fork arm
A: Article number
t: Load capacity
l: Load center
C: Material code
M: Material
V: Manufacturer marking
W: Week of manufacture
J: Year of manufacture
F: Production order number
Fork carrier with fork arms
Safety
Safety markings
13