Table of Contents
Advertisement
(3) Warning dialog window
1. The warning dialog window displays the error location.
2. "ERROR TIME (SET TIME)" displays the time when the
warning history data were saved (,or the SET TIME in
the service menu). "ERROR TIME" and "SET TIME"
shown in the main dialog window are useful to know
when the error occurred.
3. Pressing the Detail button activates Notepad and opens
the file containing the information about the set and the
warning data. To prevent writing over this file, be sure to
select "Save As" from "File" of the menu in Notepad to
save the file. The name of the file being displayed
should be "DataTemp.txt."
4. Pressing the Warning Clear button displays the
confirmation message window, which asks you whether
you will clear the warning history data. Press the OK
button to clear the warning history data or the Cancel
button to cancel clearing them.
5. Pressing the Back button displays the main dialog
window again and carries out communication with the
projector again to get information from it.
Indicates which data of the
Warning History 1, 2, or 3 are
displayed.
All the error items are
displayed in red and their
check boxes are checked.
(4) Switching the COM port
1. Select the serial port to which the cable is being
connected. When the selected serial port isn't available
or doesn't exist, an error message window is displayed.
2. Press the OK button to switch the COM port. When the
serial port is switched correctly, communication with the
projector is carried out again to get information from it.
COM port switching dialog window
Displays the SET TIME
when the warning history
data were saved.
Creates a
Clears all the
detailed report.
warning history data.
Warning dialog window
DPX-530
The information to
be displayed varies
depending on the
model.
Goes back to the
main dialog window.
39
Advertisement
Table of Contents
