Attaching A Lens Filter And Cap - Yamaha DPX-530 Service Manual

ATTACHING A LENS FILTER AND CAP

Attaching a commercially available lens filter
(a)
(b)
(c)
Attaching the lens cap
Attach the supplied lens cap when not using the projector to prevent the lens from becoming dirty or damaged. Insert the lens cap until it is
securely placed. (It should make a clicking sound.)
Important
• Do not force the lens cap onto the projector.
• Make sure that the YAMAHA name on the lens cap is aligned parallel to the top and bottom edges of the projector.
• The lens cap can be placed over the lens filter if a lens filter has been installed.
1. Carefully turn the projector upside-down.
2. Loosen the screw (a) using a Phillips screwdriver (+), and
Closed position
(no lens filter)
3. Place a lens filter (c).
4. Rotate the stopper 180° and reinsert it into its original
5. Tighten up the screw (e) using a Phillips screwdriver (+).
Important
remove the stopper (b).
location (d).
• Be sure to use a 67 mm lens filter for this projector.
• Not all 67 mm lens filters are compatible with this
projector.
(e)
(d)
DPX-530
To hold a lens filter
11