Table of Contents
Advertisement
Calculated Data
Motor Load - Percentage FLC
Thermal Capacity Used
Time to Trip
Time to Start
Unbalance Current
Logic Inputs Status
Motor Available Indication
Individual Status of all Input Contacts
Statistical Data
Motor Hours Run
Number of Motor Starts
No of Motor Trips
Last Start Time
Last Peak Starting Current
Fault Data
Last Fault
Last Alarm
Phase Currents at Time of Trip
Earth Fault Current at Time to Trip
Phase Volts at Time of Trip
2.4 Features
LCD Display for Setting Parameters and Displayed Data
Functional Keypad enables settings to be made independent of communications.
IBM PC based MPCSET software enables Setting Parameters to be configured via RS485 Port.
All functions operate fully independently of communications
Non Volatile Memory for all setting parameters calculated, statistical and fault data
Full self diagnostics and internal watchdog facility
RS485 port enables full control and monitoring by remote DCS/PLC systems
3. Technical Specification
3.1 Technical Data
3.1.1 Auxiliary Power Supply
AC Nominal:
DC [optional]
Frequency:
Maximum Power Consumption:
15/05/96
110V AC, Range: 80 - 135V AC
240V AC, Range: 160 - 270V AC
80-265V DC
45 - 65 Hz
6 - 8VA
5
MPC2000 01/96B
Advertisement
Table of Contents
