Summary Of Mpc2000 Features; Control Functions; Protective Functions; Displayed Data - P&B Goldstart MPC2000 Manual

2. Summary of MPC2000 Features

2.1 Control Functions

Full Control of:
Direct on Line Motor Starters
Direct on line Reversing Motor Starters
Direct on Line 2 Speed Motor Starters
Star/Delta Motor Starters
Undervoltage Dip Restart Facility
Motor Starts Limitation

2.2 Protective Functions

Voltage Based:
3 Phase Undervoltage Protection
3 Phase Overvoltage
Phase Sequence Protection
Phase Loss Protection
Current Based:
Thermal Overload Protection
Load increase Alarm
Thermal Capacity Pre-Alarm
Locked Rotor/Stall Protection
2 Stage Undercurrent Protection
High Set Overcurrent Protection
Low Set Overcurrent Protection
2 Stage Current Unbalance Protection
Excess Starting Time Protection
2 Stage Earth Fault Protection
Excess No of Starts Protection
RTD/Thermistor Based:
3 Channel RTD/Thermistor Temperature Protection
5 Channel RTD/Thermistor Temperature Protection (Option)

2.3 Displayed Data

Measured Data
Both Phase Volts and Line Volts
Phase Currents
Earth Fault Current
Total Real Power (Optional)
Total VA Power (Optional)
Power Factor (Optional)
RTD/Thermistor Channel resistance
15/05/96 4 MPC2000 01/96B