Table of Contents
Advertisement
15. MPC2000 Thermal Overload Protection
MPC2000 Thermal Operating Curves
The curves shown are the time/current operating
characteristics for the MPC2000 Thermal Overload
protection.
Curve 1 :Cold Curve
Overload Setting =105%
Curve 2 :Hot Curve
Overload Setting =105%
Running From 100% FLC
Hot/Cold Ratio = 80%
Curve 3 : Hot Curve
Overload Setting:=105%
Running From 100% FLC
Hot/Cold Ratio = 50%
Curve 4 : Hot Curve
Overload Setting:=105%
Running From 100% FLC
Hot/Cold Ratio = 20%
Explanation
The MPC2000 simulates the thermal condition of the
motor
by means of a thermal register. The heating of the register
is related to the square of the largest of the three line
currents.The rate of cooling of the thermal register is
directly related to the rate of heating. The value of the
thermal register is called thermal capacity and it is used to
simulate motor temperature.
100
percent
thermal
temperature has reached the maximum allowed and is the
level at which an overload trip will occur.
When the motor is stopped for a long period of time the
thermal capacity used is zero, this is known as the 'cold
condition', and the motor has 100 percent of it's thermal
capacity available for heating before a trip will occur.
When a motor starts and is running it's temperature increases, after running at normal FLC for a period of time the
motor will have reached a hot condition and a lower value of thermal capacity will be available.
The Hot/Cold Ratio setting determines the amount of available thermal capacity for a motor running at FLC i.e. hot
condition, this is set as a percentage ratio of the amount of thermal capacity available at the cold condition which is
always 100%.
The thermal capacity available for a motor running at normal FLC i.e. Hot condition is the Hot/Cold Ratio setting. For
example if the Hot/Cold ratio setting is 60% and the motor has been running at normal FLC for some time the amount of
thermal capacity available is 60% then the amount displayed by the MPC2000 is the amount used which is 100 - 60 =
40%.
15/05/96
capacity means the motor
200
100
t
20
10
2
1
0.2
0.1
0.02
0.01
1
2
3
Multiples of FLC
35
4
5
6 7 8 9 10
MPC2000 01/96B
15
Advertisement
Table of Contents
