Download Print this page

Table Of Contents; Introduction; Series And Use; Installation - Bombas Omega 2C Series Instructions, Installation, Starting Up And Maintenance

Submersible pumps

Advertisement

INDEX
2
1

INTRODUCTION

This manual has as objective to obtain a good installation and long working of our submersible pumps
We advise to read carefully this manual, paying attention to the recommendations indicated, which fulfill the
directives of the CEE about machines.
The wrong utilization or manipulation of the product supplied by Bombas Omega invalidates the responsibility
of our company for the possible damages caused, either material or personal damages.
We recommend to keep this manual near the point of installation to be consulted by the user.
It is necessary to pay attention to the following symbols, which appear in several pages of this manual.
3
3
3
In case of any doubt or advice about this manual, you can contact us in:
BOMBAS OMEGA S.L.
8
Polígono Industrial "El Campillo", Pabellón 10B
48500, ABANTO, VIZCAYA, SPAIN
10
Tel. 94 636 35 10, Fax 94 636 35 01
email: bombas01@bombasomega.com
12
13
2

SERIES AND USE

13
This manual, with the special conditions for each model, is for the following series:
SERIES 2C: channel submersible, 3000/3600 rpm
SERIES 4C: channel submersible, 1500/1800 rpm
SERIES 6C: channel submersible, 1000/1200 rpm
SERIES 8C: channel submersible, 750/900 rpm
SERIES 2A: submersible for clean fluids
SERIES 2VT: submersible vortex 3000/3600 rpm
SERIES 4VT/6VT: submersible vortex 1000-1500/1200/1800 rpm
SERIES 4OG/6OG:: submersible gummed1000-1500/1200-1800 rpm
3

INSTALLATION

3.1 ANCHORAGE AND LEVELING, PERMANENT INSTALLATION SERIE C/VT/OG
A permanent installation is that one which is made with anchoring base and sliding guides as we show in the
following drawing.
!
Danger of mechanical origin
Danger of electric origin
3

Advertisement

loading