Fish Alarm; User Mode; Setup Menu - Humminbird Piranha Max 30 Operation Manual

There is also a series of manual ranges which can be selected. The manual depth ranges are determined by the present depth conditions.

Fish Alarm

(Setting Saved in Memory)
Press the POWER-MENU key until FISH ALARM appears.
Select Off for no fish alarm, or one of the following symbols to set the alarm. An alarm will sound when the PiranhaMax detects fish that correspond
to the alarm setting. Fish Alarm will only sound if Fish ID+ is also set to On. (Off, Large, Large/Medium, All, Default = Off)
Filter
(Setting Saved in Memory)
Press the POWER-MENU key until FILTER appears. Select either Off or On. Filter adjusts the sonar filter to limit interference on the display from sources
such as your boat engine, turbulence, or other sonar devices. (On, Off, Default = Off)

User Mode

Press the POWER-MENU key until USER MODE appears. USER MODE selects the user mode. (SMARTCAST, TRANSDUCER)
NOTE: If a transducer is not connected to the PMax30 the unit will automatically default to SmartCast™ user mode. If a transducer is connected then the PMax30 will default to the last
mode used prior to powering off .

SetUp Menu

Press the POWER-MENU key until SetUp appears. Select either Off or On. (Off, On, Default = Off)
When you choose SetUp, additional menu choices will become available that are not a part of the Main Menu system. After selecting SetUp, press the POWER-
MENU key to display the SetUp menu choices, one at a time. SetUp Menu choices include:
• Contrast
• Fish ID+
• Bottom View
• Battery Alarm
• Languages (International Units Only)
• Units
• Channel Select.
Scroll through all SetUp menu choices to exit the SetUp menu.
Magnified Bottom
with More Detail
Large fish only
Large/Medium fish only.
All fish.
Upper Zoom
Range
Structure
Lower Zoom
Range