Units - Depth; Units - Temp (International Only); Units - Distance - Humminbird 797C2 Operation Manual

To change the Units - Depth setting:
1. Highlight Units - Depth on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units -
Depth setting. (Meters [International Models only], Feet, Fathoms;
Default is Meters for International models, and Feet for Domestic models)
Units - Temp selects the units of measure for all temperature-related readouts.
International Models only.
To change the Units - Temp setting:
1. Highlight Units - Temp on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units -
Temp setting. (Celsius, Fahrenheit; Default = Celsius)
distance-related readouts, and will appear in the menu if a Temp/Speed
Accessory is connected and the paddlewheel has moved at least once, or if the
GPS Receiver is connected.
To change the Units - Distance setting:
1. Highlight Units - Distance on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units
- Distance setting. (Domestic Models: Statute Miles, Nautical Miles;
Default = Statute Miles; International Models: Meters/Kilometers,
Meters/Nautical Miles, Feet/Statute Miles, Feet/Nautical Miles;
Default = Meters/Kilometers)

Units - Depth

Units - Depth selects the units of measure for all
depth-related readouts.
Units - Temp
(International only)

Units - Distance

Units - Distance selects the units of measure for all
134