NAVCO BH Series Operation Manual page 5

NAT IO NAL A IR
Work Safety
! The symbol to the left signifies safety
instructions which deal with danger to
the health and life of a person. These
instructions must be strictly observed.
The guidelines within this document
must be understood prior to operation of
the equipment. General local safety and
accident prevention regulations must be
observed in addition to the work safety
instructions in this operating manual.
General Work Safety and Attention Instructions
It must be ensured that every person charged with the installation, operation and maintenance of the equipment has read and
understood this operating manual prior to commencing work.
If equipment is improperly operated by untrained persons, it may cause grave injury and damage.
1. The BH vibrator is intended exclusively for the application
agreed with the manufacturer.
2. The BH vibrator must only be operated in its original condition.
3. All maintenance work on the BH vibrator must only be carried
out while the equipment is off. Before starting work, ensure
that the equipment cannot be switched on accidentally or by
unauthorized persons.
4. A safety cable or chain must always secure the vibrator to
a supporting structure to prevent injury in case of mounting
failure.
CONTACT US TODAY AT
E. SALES@NAVCO.US W.
P. 832.467.3636 F.
®
VI BR ATOR CO.
Symbols to Know
NAVCO.US
A. 11929 Brittmoore Park Dr.
Houston, TX 77041
832.467.3800
Vibration Technology for Processing Bulk Materials
ATTENTION
Attention
The symbol above signifies notes, regulations and guidelines
which deal with damage to or destruction of the equipment as a
result of improper operation.
ATTENTION
ATTENTION
!
!
Page 5