Maintenance - Blast-It-All LITTLE BLASTER Manual

ITEM
NOZZLES INSPECT FOR WEAR
MEDIA HOSE INSPECT FOR WEAR / HOLES
GUN BODY INSPECT FOR WEAR
GUN ORIFICE INSPECT FOR WEAR
MYLAR INSPECT FOR POOR VISABILITY
VIEW WINDOW INSPECT FOR DAMAGE
DUST / DEBRIS
REMOVE DUST / DEBRIS ACCUMULATION
REMOVAL
DUST FILTERS CLEAN
FLEX HOSE INSPECT FOR WEAR / LEAKS
GLOVES INSPECT FOR WEAR / HOLES
WEAR PLATES INSPECT WEAR PLATE / LINERS FOR WEAR
© 2020 Hess & Associates

MAINTENANCE

1. Blasting Gun :
After 10 - 12 hours of blasting time the air
orifice and nozzle should be checked. If
the nozzle shows wear, rotate 1/4 Turn to
prevent uneven wear. If this is not
checked, it could result in the destruction
of nozzle and damage to the gun housing.
If wear is detected on the orifice tip,
replace.
2. After thumping the cartridge, the drain
Drain Cap
cap should be removed and the dust
emptied from dust collector sump into a
box, bag or container, for ease of
disposing.
DESCRIPTION
Man. # 561 v02-02 8/2020
FREQUENCY
DAILY
MONTHLY
MONTHLY
MONTHLY
PER USE
PER USE
PER USE
AS NEEDED
WEEKLY
WEEKLY
MONTHLY
Page 15