Little Blaster™ Cartridge Dust Collector - Blast-It-All LITTLE BLASTER Manual

OPERATION
Little Blaster™ CARTRIDGE DUST COLLECTOR
After installing the Dust Collector, it is very IMPORTANT to follow the next steps. This will ensure your
machine will blast satisfactorily and have good visibility in blast chamber.
© 2020 Hess & Associates
*** READ BEFORE OPERATING EQUIPMENT ***
1
Man. # 561 v02-02 8/2020
Remove RED nuts securing the motor
1.
housing and cartridge holder to dust
collector body. (Item 1) Discard these
nuts, they are not used.
2. Loosen nuts on back corners. Loosen until
the nut is to the bottom on the bolt
thread. This will allow the motor housing
and cartridge holder to rest securely on
the gasket seal.
Page 12