Advertisement
Quick Links
Advertisement
Related Manuals for Blast-It-All MAGNUM 4436
Summary of Contents for Blast-It-All MAGNUM 4436
- Page 1 WARNING...
-
Page 2: Setup Instructions
SET-UP INSTRUCTIONS MACHINES / RECLAIMS WITH DUST BAG *** READ BEFORE OPERATING EQUIPMENT *** Remove plastic from machine. Remove lag bolts from each of the four legs, then remove machine from the pallet. Attach filter bag to BLOWER outlet with hose clamp Connect motor male plug, to female plug cord from the light box. - Page 3 OPERATING INSTRUCTIONS MACHINE WITH RECLAIM *** READ BEFORE OPERATING EQUIPMENT *** Preparing parts for Blasting: All parts to be processed must be free of ***WARNING*** oil, grease, and moisture. Make sure parts are dry before putting into cabinet for GUN MUST ALWAYS BE POINTED cleaning.
- Page 4 MAINTENANCE INSTRUCTIONS MACHINE WITH RECLAIM *** READ BEFORE OPERATING EQUIPMENT *** Blasting Gun: Poor Visibility - Excessive Dust: After 10 - 12 hours of blasting time the air orifice and nozzle should be checked. If Cabinet Air inlet blocked, check the nozzle shows ear, rotate 1/4 turn to for blockage.
-
Page 12: Warranty
In all cases, defective parts must be returned to Larry Hess & Associates, Inc. before credit is issued. If genuine BLAST-IT-ALL® replacement parts are not used, the warranty is void. This warranty is in lieu of all other warranties expressed or implied and releases Larry Hess &...