Table of Contents
Advertisement
INSTALATION :
Little Blaster™ AIR CONTROLS
© 2020 Hess & Associates
*** READ BEFORE
OPERATING EQUIPMENT ***
1. Remove Box from inside of the Machine.
Box contains :
Foot Petal, ½" Air Regulator
Blast Gun w/Assembled Hose
½" Barbed Brass Fitting
2. Connect Air Regulator to the Bracket on
the Front of the Machine w/Lock Ring
3. Apply Teflon Tape to the ½" Barbed Brass
Fitting and install to the to the Inside Left
Leg of the Machine (Coupler).
Attach/Secure Inlet Air Hose to the Barbed
Brass Fitting.
Man. # 561 v02-02 8/2020
w/Assembled Hoses
Page 8
Advertisement
Table of Contents
