Installing The Switch With Two People - Cisco SFS InfiniBand Server Switch SFS 7000P Hardware Installation Manual

Rack-Mounting the Switches
Carefully push the switch unit into the rack, as shown in
Step 7
If the brackets do not slide easily, the alignment might be off. Pull the switch back toward you, and
realign the brackets.
Figure 3-5
Maintain at least six inches between the cooling vents and any obstructions.
Step 8
Secure the switch with your screws through the front of the rack, as shown in
Step 9
Figure 3-6

Installing the Switch with Two People

The following installation method requires two people to mount the switch into the rack. One person
holds the switch while another person secures it to the rack.
To install the switch with two people, follow these steps:
Separate the assembled rack brackets. (See
Step 1
Cisco SFS 7000P and SFS 7000D InfiniBand Server Switches Hardware Installation Guide
3-6
Sliding the Switch Into the Rack
Secure Switch with Screws through the Front of the Rack
Figure 3-5.
Figure 3-1.)
Chapter 3 Installing the Switches
Figure 3-6.
OL-10853-01