Installing The Switches - Cisco SFS InfiniBand Server Switch SFS 7000P Hardware Installation Manual

Installing the Switches

This chapter describes how to install and manage the Cisco SFS 7000P and SFS 7000D Server Switches
hardware and contains these sections:
Safety, page 3-2
•
Pre-installation Instructions, page 3-2
•
• Rack-Mounting the Switches, page 3-3
Configuring Basic Connectivity, page 3-7
•
• Connecting Network Devices, page 3-11
Managing the System, page 3-14
•
Warning During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly
touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94
Read the installation instructions before connecting the system to the power source. Statement 1004
Warning
Warning This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
Statement 1040
OL-10853-01
Cisco SFS 7000P and SFS 7000D InfiniBand Server Switches Hardware Installation Guide
C H A P T E R
3
3-1