Sareer Rochelles Bed Assembly Instructions

mins

Approximate

Assembly Time

Two persons are

recommended to

assemble this product

Rochelles 5' Bed

BEFORE STARTING...

Read the assembly instructions carefully before

beginning assembly.

Check and ensure that you have all parts and fittings

for complete assembly.

Choose a clean, level, spacious assembly area.

Hard surfaces may damage the product.

The packaging and contents can be a choking

hazard, therefore keep out of reach of small children

at all times.

Do not over tighten the bolts as this may damage

the thread.

Table of Contents

Need help?

Do you have a question about the Rochelles Bed and is the answer not in the manual?

Page 1 mins Approximate Assembly Time Two persons are recommended to assemble this product Rochelles 5' Bed BEFORE STARTING... Read the assembly instructions carefully before beginning assembly. Check and ensure that you have all parts and fittings for complete assembly. Choose a clean, level, spacious assembly area. Hard surfaces may damage the product.
Page 2 HARDWARE 5/16 x 25mm Washer 5/16 x 50mm Hex Nut x 7pcs x 12pcs x 14pcs x 7pcs Allen Key Spanner x 1pc x 1pc PART...
Page 3 Screw in the wooden legs to headend and footend. Attach the siderails and centre rail to the bedend.
Page 4 Attach across rail and support legs to the base. Align the pins on the Holders to the holes along the Centre Rail and the Siderails. Gently tap them into the holes using hand palm.
Page 5 Retightening of all fixing periodically is recommended. When moving your fully assembled bed you must first remove the mattress and lift the frame into position, take care when lifting and always have two people handling the bed. PLEASE DO NOT DRAG THE BED as this will cause damage to the rail.