Sareer Milano Day Bed Assembly Instruction

ASSEMBLY INSTRUCTION

Milano Day Bed

BEFORE YOU START

1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.

2. Check and ensure that you have all required contents for complete assembly.

3. Always read the assembly instructions carefully before beginning assembly.

4. The packaging and contents can be a choking hazard, therefore keep out of reach of small chidren at all times.

5. Do not over tighten the bolts as this may damage the thread.

1-4

Table of Contents

Do you have a question about the Milano Day Bed and is the answer not in the manual?

Page 1 ASSEMBLY INSTRUCTION Milano Day Bed Milano Day Bed BEFORE YOU START 1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product. 2. Check and ensure that you have all required contents for complete assembly.
Page 2 Approximate Assembly 2 person needed Time:20mins EXPLODED EXAMPLES FITTINGS M6x20mm bolt x 8pcs M4 Allen Key x 1pc Spanner x 1pc M6x50mm bolt x 2pcs M6 Hex Nut x 2pcs...
Page 3 Step 1 Attach the frame as shown. Step 2 Align the pins on the Plastic Holders to the holes along the Siderails. Gently tap them into the holes.
Page 4 Retightening of all fixing periodically is recommended. When moving your fully assembled bed you must first remove the mattress and lift the frame into position, take care when lifting and always have two people handling the bed. PLEASE DO NOT DRAG THE BED as this will cause damage to the rail.