Catalyst 4900M Switch Chassis Rear Panel Connections And Features - Cisco Catalyst 4900M Installation Manual

Catalyst 4900M Switch Chassis

Catalyst 4900M Switch Chassis Rear Panel Connections and Features

Figure 1-2
Figure 1-2
1
2
3
4
The chassis rear panel features include:
•
•
•
•
•
Cisco Catalyst 4900M Switch Installation Guide
1-4
shows the chassis rear panel with the major features identified.
View of the Rear Panel
1
4
Input OK LED (power
supply)
Output OK LED (power
supply)
Fan Status LED
Reset button
Reset button—The Reset button is used to restart the switch. Use a paper clip or other small, pointed
object to press the Reset button.
Console port—A console serial port (RJ-45) provides for switch management using standard
console equipment. (See Figure
"Specifications," for the console and management ports.
Management port—The Management port on the rear panel offers the same TCP/IP based
management services available via inband access (telnet SNMP etc.). IP address configuration via
BOOTP is supported on the Management port; it also supports image download to the switch.
USB connector—A USB connector is provided for future expansion.
Compact Flash slot—The Compact Flash slot accepts both 64-MB and 128-MB Type 1 compact
Flash cards. You can use it for file transfer tasks such as loading a new software image. The Flash
card is optional and can be obtained from third-party suppliers.
For more information, refer to Using the Compact Flash on the Catalyst 4500 Series Supervisor
Engines at the following URL:
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/configuration/notes/OL_27
88.html
2
5 7 8
6
5 Console port
6 Management port
7 USB connector
8 Compact Flash slot
1-2.) A connector pinout table is provided in
Chapter 1 Product Overview
1 2 3
Appendix A,
78-18350-02