Statement 3015-Cs-03 Certification For Canada; Statement 8001-Jate Certification For Japan - Cisco Catalyst 4900M Installation Manual

Cisco systems switch installation guide
Hide thumbs Also See for Cisco Catalyst 4900M:
Table of Contents

Advertisement

Appendix B
Compliance Information and Translated Safety Warnings
Statement 3015—CS-03 Certification for Canada
The Catalyst 4900M switch meets the requirements of the Industry Canada label (CS-03) for
telecommunications equipment.
Table 4
Model Number
WS-X6608-T1
WS-SVC-CMM-6T1
Observe the following general information and safety precautions:
Do not attempt to make such connections yourself. Contact the appropriate electric inspection
Warning
authority or electrician as appropriate. Statement 285
Statement 8001—JATE Certification for Japan
The Catalyst 4900M switches meet the requirements of the Japan Approvals Institute for
Telecommunications Equipment (JATE).
Table 5
Applicant
Nihon Cisco Systems
78-18350-02
CS-03 Approval
The industry Canada label identifies CS-03 certified equipment. This certification means that the
equipment meets certain telecommunications network protection, operation, and safety
requirements as described in the appropriate terminal equipment requirements document(s). The
department does not guarantee the equipment will operate to the user's satisfaction.
Before installing the equipment, check that you have permission to connect it to the facilities of the
local telecommunications company. The equipment must also be installed using an acceptable
method of connection. The customer should be aware that compliance with the above conditions
may not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative designated by the supplier.
Any repairs or alterations made by the user to this equipment, or any equipment malfunctions, may
cause the telecommunications company to request that the user disconnect the equipment.
Ensure that the electrical ground connections of the power utility, telephone lines, and internal
metallic water pipe system, if present, are connected together. This precaution may be particularly
important in rural areas.
JATE Approval
Table 4
lists the CS-03 approval numbers for the equipment.
Approval Number
2461 10550A
2461B-0008
Table 5
lists the JATE approval details.
Model Number
WS-X6608-T1
Cisco Catalyst 4900M Switch Installation Guide
Statement 8003—Telecom Approvals Listing
Approval Number
L00-0071
B-49

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ws-c4948-10ge-e

Table of Contents