Quicklock Face Rest - OAKWORKS MEDICAL PRODUCTS PG Series User Manual

DIRECTIONS FOR USE
T A B L E E X T E N D E R U S E
CAUTION
The Table Extender lengthens the table allowing for access to the patient's neck for exams such
as carotid artery and thyroid.
NOTE: You will need an acces-
sory mounting plate in order to
use the table extender.
Q U I C K L O C K F A C E R E S T
CAUTION
Double articulating action provides nearly limitless positioning options with the QuickLock Face Rest.
The adjustable pad takes pressure off sensitive facial areas while providing superb support. The
QuickLock Face Rest can be used in both prone and supine positioning and folds out of the way when
not in use. Adjustments are made easily by loosening the cam locks, adjusting for height and angle
and then locking the cam locks into the desired position.
NOTE: You will need an
accessory mounting plate in
order to use the QuickLock
face rest.
Insert dowels into
Accessory Mounting Plate
Do not put excessive weight or pressure on the table extender.
Insert the Table Extender tubes into the Accessory Mounting
Plate. Make sure the push buttons snap into place in the slots
on the sides of the Mounting Plate.
Do not put excessive weight or pressure on the Quicklock Face Rest. Do not extend the dowels of the
Quicklock Face Rest 3" (7.6 cm.) from the Fowler (Backrest) section.
Loosen Cam Locks &
adjust face rest into place.
QuickLock
Face Rest
Tighten the Cam Locks.
Important Safety Note:
Maximum Distance from edge
of Table = 3" (7.6 cm.)
The Face Rest can be
used for either prone or
supine positioning.
28